|
|
|
Crossarm Gains
For use in place of a gain cut into the pole. Improves stability while setting crossarm away from the pole, providing drainage and air space. The CAG-10-8 and CAG-10-14 feature welded construction and are designed for braceless crossarms or any point where greater stability is desired. The CAG-2 and CAG-3 are formed steel.
MATERIAL: A-36
hot rolled steel, hot galvanized per ASTM A-153
| CATALOG NUMBER | dimensions in inches | steel size in inches | ||
| A | B | channel |
angle |
|
| CAG-10-8 | 8 | 12 | 4 x 5.4 lb. | 4 x 3 x 1/4 |
| CAG-10-14 | 14 | 12 | 4 x 5.4 lb. | 4 x 3 x 1/4 |
CATALOG NUMBER |
dimensions in inches | |
| mounting hole size | steel size | |
| CAG-2 | 15/16 x 1-13/16 slot | 3/16 thick |
TWIN ARM SPACERS
For twin arm construction. Provides superior strength and a neater structure using fewer hardware items. Designed with multiple attachment points for insulators or other deadending devices. Tie bolt fasteners not included.
MATERIAL: Ductile
iron, grade 604512, hot galvanized per ASTM A-153
| CATALOG NUMBER | dimensions in inches | |||
| crossarm size | A | B | C | |
CAS-355 |
3 1/4 x 4 1/4 |
11/16 |
11/16 |
11/16 |
CAS-355T |
3 1/4 x
4 1/4 |
5/8 tapped |
11/16 |
11/16 |
CAS-455* |
3 1/4 x 4 1/4 |
13/15 |
11/16 |
11/16 |
CAS-455T |
3 1/4 x
4 1/4 |
3/4 tapped |
11/16 |
11/16 |
* RUS Accepted
POLE STEPS
For easy access to pole mounted equipment. Features fetter drive thread, sharp point and flat driving surface for ease of installation. Mark on shaft denotes proper driving depth.
| CATALOG NUMBER | dimensions in inches | ||
| diameter | length | extension from pole | |
| S-589 |
5/8 |
9 |
5 |
S-5810 |
5/8 |
10 |
6 |
LINE HARDWARE
Inc.
4426 Hunt Avenue, Saint
Louis, MO 63110
800.546.3411 fax: 314.531.1006
Email: info@linehardware.com
Contents | Feedback | Sales Representatives | Search
Alphabetical Index | Catalog Number Index
The Company | Materials | Finish | Standards | Weights and Packaging | Stock Items/Custom
Products
