Line Hardware
FETTER DRIVE, Regular Point
| CATALOG NUMBER | Dimensions (inches) | ||
| Diameter | Length | Minimum Thread Length | |
| LSFD-142RP | 1/4 | 2 | 1-1/2 |
| LSFD-14212RP | 1/4 | 2-1/2 | 1-3/4 |
| LSFD-38212RP | 3/8 | 2-1/2 | 1-3/4 |
| LSFD-383RP | 3/8 | 3 | 2 |
| LSFD-384RP | 3/8 | 4 | 2-1/2 |
| LSFD-384RP | 1/2 | 3 | 2 |
| LSFD-12312RP | 1/2 | 3-1/2 | 2-1/4 |
| LSFD-124RP | 1/2 | 4 | 2-1/2 |
| LSFD-12412RP | 1/2 | 4-1/2 | 2-3/4 |
| LSFD-125RP | 1/2 | 5 | 3 |
| LSFD-585RP | 5/8 | 5 | 3 |
FETTER DRIVE, Pilot Point
| CATALOG NUMBER | Dimensions (inches) | ||
| Diameter | Length | Minimum Thread Length | |
| LSFD-383PP | 3/8 | 3 | 2 |
| LSFD-384PP | 3/8 | 4 | 2-1/2 |
| LSFD-123PP | 1/2 | 3 | 2 |
| LSFD-12312PP | 1/2 | 3-1/2 | 2-1/4 |
| LSFD-124PP | 1/2 | 4 | 2-1/2 |
| LSFD-12412PP | 1/2 | 4-1/2 | 2-3/4 |
| LSFD-125PP | 1/2 | 5 | 3 |
GIMLET POINT
| CATALOG NUMBER | Dimensions (inches) | ||
| Diameter | Length | Minimum Thread Length | |
| LSGP-14112 | 1/4 | 1-1/2 | 1-1/4 |
| LSGP-142 | 1/4 | 2 | 1-1/2 |
| LSGP-14212 | 1/4 | 2-1/2 | 1 3/4 |
| LSGP-143 | 1/4 | 3 | 2 |
| LSGP-516212 | 5/16 | 2-1/2 | 1-3/4 |
| LSGP-383 | 3/8 | 3 | 2 |
| LSGP-124 | 1/2 | 4 | 2-1/2 |
TWIST DRIVE
| CATALOG NUMBER | Dimensions (inches) | ||
| Diameter | Length | Minimum Thread Length | |
| LSTD-124 | 1/2 | 4 | 2-1/2 |
| LSTD-125 | 1/2 | 5 | 3 |
Note: For all Product weights and standard package information refer to price sheet
MATERIAL: Steel.
FINISH: Hot dip galvanized per ASTM A-153.
Made with rolled threads and standard square heads. The upset shoulder below the head is the same diameter as the threads and assures a snug fit in hardware mounting holes. Gimlet point lag screws are also available in hex head. To order, add “H” to catalog number. Example: LSGP-124H.
